Sichuan Haina Lianchuang Medical Equipment Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. He chunxia
  • Company Name : Sichuan Haina Lianchuang Medical Equipment Co., Ltd.
  • Tel : 86-28-61986697
  • Fax : 86-28-65570850
  • Address : Sichuan,chengdu,2-4-502,No.239 Shuqing Road, Qingyang Disdrict
  • Country/Region : China
  • Zip : 610091

Dental portable x-ray unit

Dental portable x-ray unit
Product Detailed
dental x-ray unit

 dental x-ray unit

Technical specification :

Power (v)                 AC220 50Hz

Tube voltage               60KV

Tube current               0.1MA

Frequency                 30KHz

Time of exposure            1-9S

Radiation leakage            <20µ gy/h

Rated power                 60W

Weight                       2kg

Environmental temperature      5-40

Relative humidity              <80% 

installation process of portable x-ray

 

1.       Open the box

2.       Check the accessories: Main Unit, Ball Head, Manual, Guarantee Card, Quality Certification, Remote controller, Blue Tube, Professional film developing liquid, Dental film, Syringe, Fuss, Packing list.

3.       Check the outward appearance of the unit, also check to see whether theres any sound from the inner of the unit from the sake.

4.       Install the Blue Tube to the Ball head.

5.       Fix the six core wire of the main unit to the connection of the Ball Head

6.       Turn on the power on the panel of the Main unit, Then the digital read out panel will show the pre-setting time

7.       Set the time: 1> Press the SET button to change the time

              2> + means increase the time

              3> - means decrease the time

              4> Press SET again to turn off the pilot lamp, then its ready to take a picture.

8.       Put the Tooth film plumb behind the tooth which is going to be taken picture, and be as close as possible (the glossy side stick to the tooth). There are three ways to take a picture: use the ON/OFF on the main Unit, or use the remote controller, or use the button on the touch head tube. The program will be back the pre-setting status after taking one film.

9.       Draw out 3ML liquid by using the syringe, then inject the liquid into the film bag. Knead the bag to make sure the liquid can flow around, and make sure the temperature is above 23 centigrade degree while doing this step. Keep Knead for 4 minutes, and then open the film bag, wash it under running water.

Dental portable x-ray unit



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.